2 required per section.

20" wide plywood and aluminum deck.

Short height frame for use on top of 5' frames.

Narrow standard frame, same as 5' x 5', but only 30" wide.

Standard outdoor scaffold frame. One section will measure 5' high x 5' wide and can be either 7' or 10' long. Each section requires 2 frames, 2 braces. See optional accessories below.

2 required per section.

20" wide plywood and aluminum deck.

4 required per set. Hard rubber for smooth surfaces.

Walk through frame. Available with or without ladder rungs on one side. 6'4" tall x 5' wide.

Wheel set for use on gravel or soft surfaces. Is easy to move because it has large inflated tires.

Provides a fence around the top of the scaffold tower. Requires 4 per set.

Provides a fence around the top of the scaffold tower. Requires 4 per set.

Base legs to level the scaffold tower and prevent settling into soft surfaces. Available with base plate or socket for caster.

Provides additional stability and is required above three 5' sections.

Provides overhand on scaffolding and must be used with counterweight to balance tower.

Narrow inside use frame. This scaffolding can be erected on steps. 1 section measures 6' high x 6' long x 30" wide and requires 2 frames, 2 braces and a deck. Wheels, outriggers & guardrails shown are optional. This picture shows complete assembly, no

Half height frame for use on top of 6' frames.

2 braces required per section.

6' x 30" plywood deck.

Provides additional stability and is required above one 6' section.

Provides a fence around the top of the scaffold tower.

4 casters required per set.